Threaded Connector TC-31-12-40

Source this threaded connector by its exact part number. Send the connector drawing and intended mating feature, required material, surface treatment and order quantity for a quotation from Qiyi.

Product modelTC-31-12-40Catalogue description: 4040 · Catalogue mass: 12.6 g
Material listingCarbon Steel
Surface treatment listingZinc plated

Request a Quotation

Include TC-31-12-40 and your required quantity in the enquiry.

Before you order

  • Confirm the complete thread designation, engagement and preparation requirements.
  • Specify the material grade and surface treatment; confirm the available combination.

Threaded Connector TC-31-12-40 at a Glance

TC-31-12-40 is the threaded connector listed under catalogue description 4040, with a mass of 12.6 g. Review the original drawing and specifications, then confirm the mating interface and order requirements with Qiyi.

Part number

TC-31-12-40

Use the complete identifier on the drawing and purchase order.

Catalogue description

4040

The identifier is retained exactly as printed in the source table.

Catalogue slot field

8

Confirm dimensions and units against the mating profile drawing.

Catalogue mass

12.6 g

This is the listed part mass, not a connection load rating.

Threaded Connector Specifications & Catalogue Drawings

The target entry is TC-31-12-40. The other rows identify separate part numbers; keep each drawing and its table together.

TC-31-12-40 product listing: original threaded connector catalogue drawing 1
Original catalogue drawing 1, paired with the table below. Confirm the controlled drawing before dimensional approval.
Description Slot Mass/g PartNo
4040 8 12.6 TC-31-12-40

Catalogue group 2 follows below; use the part number in its own table.

TC-31-12-40 product listing: original threaded connector catalogue drawing 2
Original catalogue drawing 2, paired with the table below. Confirm the controlled drawing before dimensional approval.
Description Slot Mass/g PartNo
4545 10 TC-35-14-45

Carbon Steel Threaded Connector: Material & Finish Options

The original product summary lists the following material and surface-treatment information.

Material listing

Carbon Steel

Confirm the required steel grade and the available material/finish combination.

Surface treatment

Zinc plated

Confirm the exact treatment specification, appearance and any required coating thickness.

Threaded Connector Dimensions & Thread Engagement Checks

For the TC-31-12-40 threaded connector, confirm the complete thread designation, engagement and mating-part preparation on the controlled drawing. The catalogue description and slot field do not specify these requirements.

Review item
Send with your enquiry
Confirm before ordering
Part identification
TC-31-12-40 and the applicable drawing revision.
Confirm the exact catalogue entry and required quantity.
Thread and mating-part preparation
Connector drawing and intended mating feature.
Confirm the complete thread designation, engagement and preparation requirements.
Material and finish
Required grade, surface specification and service environment.
Confirm the available combination and supporting records.
Assembly acceptance
Joint conditions, critical dimensions and hardware requirements.
Confirm acceptance criteria, included components and any required assembly data.

Threaded Connector Selection: TC-31-12-40

Threaded Connector Specifications: Confirm the Complete Thread

The source table gives a description, slot field and mass for the current part. It does not state a complete thread designation. Request the thread details and mating-part preparation before selecting hardware or machining a connection.

Comparing Threaded Connector Entries with Incomplete Data

The second table contains another connector entry with an empty mass cell. That omission is retained in the catalogue. Ask for the missing value if purchasing that alternative; do not copy the current connector mass into the blank cell.

Compare another catalogue listing: Profile Connector PC-32-30-90. Confirm its own drawing and part number before considering a substitution.

Discuss Your Threaded Connector Requirements

Send TC-31-12-40, the mating-part drawing and the required quantity. Confirm material, finish and acceptance requirements with Qiyi.

Send a product enquiry

Qiyi: Threaded Connector Supplier & Fastener Manufacturer

Discuss this threaded connector alongside the wider fastener range presented by Yueqing Qiyi Fastener Co., Ltd.

Yueqing Qiyi Fastener Co., Ltd.

Qiyi manufactures and supplies bolts, nuts, screws, washers and custom components. Its company profile describes a range covering both standard fasteners and project-specific requirements.

Bolts & nuts

Core fastening components in the Qiyi product range.

Screws & washers

Additional fastener categories for a wider parts list.

Standard products

Catalogue products identified by their own part numbers.

Custom components

Project-specific components included in the company offering.

Connect Your Parts List with Your Project

Look beyond one component

Qiyi’s published range brings several fastener categories into the same supplier enquiry.

Share the application context

The company profile identifies construction, machinery, electronics and automotive among the industries it serves.

Define any custom requirement

For a non-catalogue component, send a drawing and confirm feasibility, scope and commercial terms with Qiyi.

Meet the Fastener Manufacturer: Qiyi Factory Tour

A closer look at the workshop environments presented on Qiyi’s company website.

See the Setting Behind the Catalogue

The published factory tour shows workshop machinery, wire coils and production-floor layouts. These photographs provide a view of the facilities presented by Qiyi alongside its fastener range.

For your order, confirm the applicable manufacturing route, inspection requirements and supporting documents directly with Qiyi.

Explore Qiyi’s company profile

Threaded Connector: Fit, Materials & Ordering FAQs

Answers for identifying the catalogue entry and preparing an order.

Can I select the mating thread from TC-31-12-40 alone?

The model code is not a complete thread specification. Confirm the thread type, size, engagement and mating-part preparation with Qiyi using the applicable drawing.

What material and finish are listed for TC-31-12-40?

The original summary states Material: Carbon Steel; Surface treatment: Zinc plated. Confirm the required grade and exact finish specification in the quotation.

Where can I confirm threaded connector dimensions and installation details?

Request the controlled drawing for TC-31-12-40 and provide the mating-part drawing. Confirm the interface, fastening details and assembly access before installation.

What should I send for a TC-31-12-40 quotation?

Send the exact part number, quantity, drawing revision and the required material and finish. Confirm included hardware, supporting documents and delivery requirements in the quotation.

Specify your threaded connector.

Request a quotation for TC-31-12-40 with your quantity, drawing and required finish. Confirm the agreed specification before ordering.

Request a quote

Qiyi Fastener · Company information